Authentication 802.1X - Cisco ROUTER-SDM-CD User Manual

AAA Screen Reference
Table 35-10 NAC Authentication Fields
Element
Add
Edit
Delete
List Name
Method 1
Method 2
Method 3
Method 4

Authentication 802.1x

Note
Cisco Router and Security Device Manager 2.5 User's Guide
35-12
Field Reference
Table 35-10 describes the fields in this screen.
Description
Use these buttons to create, edit, and remove method lists.
The method list name. A method list is a sequential list describing
the authentication methods to be queried in order to authenticate a
user. If the NAC wizard was used to create a NAC configuration, the
list name "default" is displayed in this column.
The method that the router will attempt first. If the NAC wizard was
used to create a NAC configuration, the method name "group
SDM_NAC_Group" is displayed in this column.
If one of the servers in this method authenticates the user (sends a
PASS response), authentication is successful. If a server returns a
FAIL response, authentication fails. If no servers in the first method
respond, then the router uses the next method in the list. Methods
can be ordered when you create or edit a method list.
The methods, in order, that the router will use if the servers
referenced in method 1 do not respond. If there are fewer than four
methods, the positions for which no list has been configured are
kept empty.
The Authentication 802.1x
802.1x authentication.
You cannot specify additional method lists for 802.1x configuration.
Chapter 35 Authentication, Authorization, and Accounting
window displays the method lists configured for
OL-4015-12