Cisco ROUTER-SDM-CD User Manual page 421

Chapter 17 IP Security
IP Compression
Note
Mode
Type
What Do You Want to Do?
If you want to:
Add a new transform set to the router's
configuration.
Edit an existing transform set.
Delete an existing transform set.
OL-4015-12
Indicates whether IP data compression is used.
If your router does not support IP compression, this box will be disabled.
This column contains one of the following values:
Tunnel—Both the headers and data are encrypted. The mode used in VPN
•
configurations.
Transport—Only the data is encrypted. This mode is used when the
•
encryption endpoints and the communication endpoints are the same.
Either User Defined or Cisco SDM Default.
Do this:
Click Add, and create the transform set in the Add Transform
Set window.
Select the transform set, and click Edit. Then edit the
transform set in the Edit Transform Set window.
Note
Select the transform set, and click Delete.
Note
Cisco Router and Security Device Manager 2.5 User's Guide
Cisco SDM Default transform sets are read-only and
cannot be edited.
Cisco SDM Default transform sets are read-only and
cannot be deleted.
Transform Set
17-17