Routing - Cisco ROUTER-SDM-CD User Manual

25
C H A P T E R

Routing

The Routing window displays the configured static routes and Routing Internet
Protocol, (RIP), Open Shortest Path First (OSPF), and Extended Interior Gateway
Routing Protocol (EIGRP) configured routes. From this window, you can review
the routes, add new routes, edit existing routes, and delete routes.
Static and dynamic routes configured for GRE over IPSec tunnels will appear in
Note
this window. If you delete a routing entry that is used for GRE over IPSec
tunneling in this window, that route will no longer be available to the tunnel.
Static Routing
Destination Network
This is the network that the static route provides a path to.
Forwarding
This is the interface or IP address through which packets must be sent to reach the
destination network.
Optional
This area shows whether a distance metric has been entered, and whether or not
the route has been designated as a permanent route.
Cisco Router and Security Device Manager 2.5 User's Guide
25-1
OL-4015-12