Connection: Serial Interface, Frame Relay Encapsulation - Cisco ROUTER-SDM-CD User Manual

User guide
Table of Contents

Advertisement

Connection: Serial Interface, Frame Relay Encapsulation

Connection: Serial Interface, Frame Relay
Encapsulation
Encapsulation
IP Address
Cisco Router and Security Device Manager 2.5 User's Guide
6-40
Complete these fields if you are configuring a serial subinterface for
encapsulation. If you are editing a connection or creating a connection in the Edit
Interfaces and Connections window, the encapsulation is shown but is not
editable. If you need to change the encapsulation type, delete the connection and
re-create it using the encapsulation type you need.
Frame Relay
chosen.
Choose either Static IP address or IP unnumbered.
IP Address
If you chose Static IP address, enter the
value from your network administrator or service provider. For more information,
see
IP Addresses and Subnet
Subnet Mask
If you chose Static IP address, enter the
the portion of the IP address that provides the network address. This value is
synchronized with the subnet bits. Your network administrator or service provider
provides the value of the subnet mask or the network bits.
Subnet Bits
Alternatively, enter the
provides the network address.
IP Unnumbered
If you chose IP unnumbered, the interface will share an IP address that has already
been assigned to another interface. Choose the interface whose IP address this
interface is to share.
IP address
Masks.
subnet
network bits
to specify how much of the IP address
Chapter 6
Edit Interface/Connection
Frame Relay
for this interface. Obtain this
mask. The subnet mask specifies
OL-4015-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Router and security device manager 2.5

Table of Contents