How Do I; How Do I Install And Configure A Posture Agent On A Host - Cisco ROUTER-SDM-CD User Manual

How Do I...

How Do I...
How Do I Configure a NAC Policy Server?

How Do I Install and Configure a Posture Agent on a Host?

Cisco Router and Security Device Manager 2.5 User's Guide
30-18
The following topics contain procedures for performing tasks that the Create NAC
wizard does not help you to do.
The router must have a connection to a Cisco Secure Access Control Server (ACS)
running ACS software version 3.3. The ACS must be configured to use the
RADIUS protocol in order to implement NAC. The document at the following
link contains an overview of the configuration process.
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns466/c654/cdccont_0
900aecd80217e26.pdf
Documents at the following link explain how to install and configure Cisco Secure
ACS for Windows Servers version 3.3.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs3
3/index.htm
If you are a registered Cisco.com user, you can download Cisco Trust Agent
(CTA) software from the following link:
http://www.cisco.com/cgi-bin/tablebuild.pl/cta
The document at the following link explains how to install and configure CTA
software on a host.
http://www.cisco.com/en/US/products/ps5923/products_administration_guide_b
ook09186a008023f7a5.html
The specific installation procedures required to install third-party posture agent
software and the optional remediation server vary depending on the software in
use. Consult the vendor documentation for complete details.
Chapter 30 Network Admission Control
OL-4015-12