Cisco ROUTER-SDM-CD User Manual page 305

Chapter 12 Easy VPN Remote
Table 12-5 Server Information Fields (continued)
Element
Mode of operation with overlapping address space and local devices needing to be reached
If you clicked Yes in the Client IP Addressing section of the Network Information screen, and also
clicked Yes in the Device Reachability section, the router is automatically configured for Network
Extension mode.
Have the server assign an IP
address to manage my router
remotely
Mode of operation with overlapping address space but no devices needing to be reached
If you clicked Yes in the Client IP Addressing section of the Network Information screen, but clicked
No in the Device Reachability section, the router is automatically configured for Client mode. The
Easy VPN server automatically assigns the router an IP address so that it can manage the router Easy
VPN operation remotely. All devices on the local network will share this IP address when
communicating with other devices on the corporate network.
Easy VPN Remote Wizard: Authentication
OL-4015-12
Description
If you choose Network Extension, you can enable remote
management of the router by checking the box to request a
server-assigned IP address for your router. This IP address can be
used for connecting to your router for remote management and
troubleshooting (ping, Telnet, and Secure Shell). This mode is
known as Network Extension Plus
If the router is not running a Cisco IOS image that supports
Note
Easy VPN Remote Phase IV or later, you will not be able to
set Network Extension Plus.
Check this box if you want the Easy VPN server to assign an IP
address to the router so that it can manage the router Easy VPN
operation remotely.
Use this window to specify security for the Easy VPN Remote tunnel.
Field Reference
Table 12-6 describes the fields in this screen.
Cisco Router and Security Device Manager 2.5 User's Guide
Creating an Easy VPN Remote Connection
12-11