Add Or Edit Easy Vpn Server: General Tab - Cisco ROUTER-SDM-CD User Manual

Chapter 14 Enhanced Easy VPN
Configure Idle Timer

Add or Edit Easy VPN Server: General Tab

Name for this connection
IP Address of Virtual Tunnel Interface
Tunnel Mode
Description
OL-4015-12
The group name, IP address pool name, DNS and WINS server names, and
domain name of each configured group is shown in the list. When you click Add
to configure settings for a new group or click Edit to change settings, the changes
appear in this list. To use settings for an existing group as a basis for a new group
configuration, select the existing group and click Clone. The Add, Edit, and Clone
buttons display dialogs that enable you to configure group settings.
Check Configure Idle Timer if you want to specify how long a connection is to
be maintained for idle clients in the Idle Timer fields. Enter time values in
HH:MM:SS format. For example, to enter 3 hours, 20 minutes, and 32 seconds,
enter the following values in the fields:
03:20:32
The timeout value will apply to all groups configured for this connection.
Enter general information for the Easy VPN Server connection in this dialog.
Enter a name to identify this connection the name that you enter is displayed in
the Edit Easy VPN Server window.
Click Interface and Authentication
Tunnel fields.
Choose IPSec-IPV4 in the Tunnel Mode field. The IPSec-IPV4 option enables the
creation of a IP version 4
You can enter a description that administrators in you network will find useful
when changing configurations or troubleshooting the network.
Cisco Router and Security Device Manager 2.5 User's Guide
for a description of the IP Address of Virtual
IPSec tunnel.
14-5