Cisco ROUTER-SDM-CD User Manual page 704

Editing QoS Policies
Table 29-15 Configure Queuing Fields
Element
LLQ Chosen
Priority Percentage
CBWFQ Chosen
Bandwidth
Bandwidth Remaining
Random Detect
Fair Queue Chosen
Queue Limit
Random Detect
Cisco Router and Security Device Manager 2.5 User's Guide
29-22
Description
Bandwidth is allocated as an absolute percentage of the total
bandwidth of the interface or tunnel. Enter a percentage value from
1 to 100 to specify the amount of bandwidth that you want to use.
Bandwidth is allocated as an absolute percentage of the total
bandwidth of the interface or tunnel. Enter a percentage value from
1 to 100 to specify the amount of bandwidth that you want to use.
Bandwidth is allocated as a relative percentage of the total
bandwidth available on the interface. Enter a percentage value from
1 to 100 to specify the amount of available bandwidth that you want
to use.
To enable Weighted Random Early Detection (WRED), click
Random Detect.
Enter the number of packets to allow in the queue.
To enable Weighted Random Early Detection (WRED), click
Random Detect.
Chapter 29 Quality of Service
OL-4015-12