Edit Route Map Entry - Cisco ROUTER-SDM-CD User Manual

Network Address Translation Rules
Name
Route map entries
To Edit a Route Map Entry

Edit Route Map Entry

Name
Seq No.
Cisco Router and Security Device Manager 2.5 User's Guide
26-14
The name of this route map.
This box lists the route map entries.
Name
The name of the route map entry.
Seq No.
The sequence number of the route map.
Action
Route maps created by Cisco SDM are configured with the permit keyword. If
this field contains the value deny, the route map was created using the CLI.
Access Lists
The access lists that specify the traffic to which this route map applies.
Choose the entry, click Edit, and edit the entry in the Edit Route Map Entry
window.
Use this window to edit the access list specified in a route map entry.
A read-only field containing the name of the route map entry.
A read-only field containing the sequence number for the route map. When Cisco
SDM creates a route map, it automatically assigns it a sequence number.
Chapter 26 Network Address Translation
OL-4015-12