Cisco ROUTER-SDM-CD User Manual page 459

Chapter 19 Public Key Infrastructure
Enter New PIN
Reenter New PIN
Maximum PIN Retries
Removal Timeout
Secondary Config File
OL-4015-12
Enter a new PIN for the USB token. The new PIN must be at least 4 digits long
and must match the name of the token you want to log in to. If you are editing a
USB token login, the current PIN will be replaced by the new PIN.
Reenter the new PIN to confirm it.
Choose the maximum number of times Cisco SDM will attempt to log in to the
USB token with the given PIN. If Cisco SDM is unsuccessful after trying for the
number specified, it will stop trying to log in to the USB token.
Enter the maximum number of seconds that Cisco SDM will continue to use
Internet Key Exchange (IKE) credentials obtained from the USB token after the
token is removed from the router. The number of seconds must be in the range 0
to 480.
If you do not enter a number, the default timeout is used. The default timeout is
triggered when a new attempt to access the IKE credentials is made.
Specify a configuration file that exists on the USB token. The file can be a partial
or complete configuration file. The file extension must .cfg.
If Cisco SDM can log in to the USB token, it will merge the specified
configuration file with the router's running configuration.
Cisco Router and Security Device Manager 2.5 User's Guide
USB Tokens
19-21