Welcome To The Scep Wizard - Cisco ROUTER-SDM-CD User Manual

Certificate Wizards
Simple Certificate Enrollment Protocol (SCEP)
Cut and Paste/Import from PC
Note
Launch the selected task button

Welcome to the SCEP Wizard

Cisco Router and Security Device Manager 2.5 User's Guide
19-2
Click this button if you can establish a direct connection between your router and
a Certificate Authority (CA) server. You must have the server's enrollment URL
in order to do this. The wizard will do the following:
Gather information from you to configure a trustpoint and deliver it to the
•
router.
Initiate an enrollment with the CA server you specified in the trustpoint.
•
• If the CA server is available, display the CA server's fingerprint for your
acceptance.
If you accept the CA server fingerprint , complete the enrollment.
•
Click this button if your router cannot establish a direct connection to the CA
server or if you want to generate an enrollment request and send it to the CA at
another time. After generation, the enrollment request can be submitted to a CA
at another time. Cut-and-Paste enrollment requires you to invoke the Digital
Certificates wizard to generate a request, and then to reinvoke it when you have
obtained the certificates for the CA server and for the router.
Cisco SDM supports only base-64-encoded PKCS#10-type cut and paste
enrollment. Cisco SDM does not support importing PEM and PKCS#12 type
certificate enrollments.
Click to begin the wizard for the type of enrollment that you selected. If Cisco
SDM has detected a required task that must be performed before enrollment can
begin, this button is disabled. Once the task is completed, the button is enabled.
This screen indicates that you are using the SCEP wizard. If you do not want to
use the Simple Certificate Enrollment Process, click Cancel to leave this wizard.
Chapter 19 Public Key Infrastructure
OL-4015-12