How Do I Enable Or Disable An Interface; How Do I View Activity On My Wan Interface - Cisco ROUTER-SDM-CD User Manual

Chapter 2 Creating a New Connection

How Do I Enable or Disable an Interface?

Step 1
Step 2
Step 3
Step 4

How Do I View Activity on My WAN Interface?

Step 1
Step 2
Step 3
Step 4
Step 5
OL-4015-12
To configure an unsupported interface, you must use the router command-line
interface (CLI).
You can disable an interface without removing its configuration, and you can
reenable an interface that you have disabled.
Click Configure on the Cisco SDM toolbar.
Click Interfaces and Connections in the left frame.
Click the interface that you want to disable or enable.
If the interface is enabled, the Disable button appears below the Interface List.
Click it to disable the interface. If the interface is currently disabled, the Enable
button appears in that location. Click that button to disable the interface.
You can view activity on a
SDM. Monitor screens can display statistics about the WAN interface, including
the number of packets and bytes that have been sent or received by the interface,
and the number of send or receive errors that have occurred. To display statistics
about a WAN interface:
From the toolbar, click Monitor.
From the left frame, click Interface Status.
In the Select an Interface field, choose the WAN interface for which you want to
view statistics.
Choose the data item(s) you want to view by checking the associated check
box(es). You can view up to four statistics at a time.
Click Show Details to see statistics for all selected data items.
Cisco Router and Security Device Manager 2.5 User's Guide
WAN interface by using the Monitor feature in Cisco
Additional Procedures
2-7