Application/Protocol Traffic - Cisco ROUTER-SDM-CD User Manual

User guide
Table of Contents

Advertisement

Chapter 42
Viewing Router Information
Step 5
Step 6

Application/Protocol Traffic

Note
Enable NBAR
Step 1
Step 2
Step 3
Step 4
Step 5
NBAR Status
OL-4015-12
Choose a QoS policy from the Inbound drop-down list to associate with inbound
traffic on the interface.
Choose a QoS policy from the Outbound drop-down list to associate with
outbound traffic on the interface.
This window allows you to monitor application and protocol traffic using
Network-based application recognition (NBAR), a protocol and application
discovery feature. NBAR is used to classify packets for more efficient handling of
network traffic through a specific interface.
If the router Cisco IOS image does not support NBAR, this status window will not
be available.
To display the status of NBAR for a specific interface, NBAR must first be
enabled on that interface. To enable NBAR, follow these steps:
Go to Interfaces and Connections > Edit Interface/Connection.
Choose the interface for which you want to enable NBAR from the Interface List.
Click the Edit button.
Click the Application Service tab.
Check the NBAR checkbox.
The NBAR status table displays the following statistics for the interface you
choose from the Select an Interface drop-down list:
Cisco Router and Security Device Manager 2.5 User's Guide
Traffic Status
42-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Router and security device manager 2.5

Table of Contents