Cisco ROUTER-SDM-CD User Manual page 754

No. of Rules
Description
To configure rules:
Cisco Router and Security Device Manager 2.5 User's Guide
32-2
NAC Rules
Firewall Rules
QoS Rules
Unsupported Rules
Externally Defined Rules
Cisco SDM Default Rules
The number of rules of this type.
A description of the rule if one has been entered.
Click the category of rule in the rule tree to display the window for that type of
rule. Create and edit rules from that window.
The help topic for these windows contains general procedures that you may find
helpful. Useful Procedures for Access Rules and Firewalls
procedures for other tasks.
Rules that specify the IP addresses to be admitted
to the network, or blocked from the network.
Rules that can specify source and destination
addresses, type of traffic, and whether the traffic
should be permitted or denied.
Rules that specify traffic that should belong to the
QoS Class that the rule is associated with.
Rules that have not been created using Cisco SDM,
and that Cisco SDM does not support. These rules
are read only, and cannot be modified using Cisco
SDM.
Rules that have not been created using Cisco SDM,
but that Cisco SDM does support. These rules may
not be associated with any interface.
These rules are predefined rules that are used by
Cisco SDM wizards and that you can apply in the
Additional Tasks>ACL Editor windows.
Chapter 32 ACL Editor
contains step by step
OL-4015-12