Application Service - Cisco ROUTER-SDM-CD User Manual

Chapter 6 Edit Interface/Connection
Duplex
Power Inline

Application Service

QoS
Netflow
OL-4015-12
Choose full or half, or auto to allow for the duplex to be automatically set to
match the network to which the switch port will be connected.
If Speed is set to auto, then Duplex is disabled.
The Power inline drop-down list appears if the switch port supports an inline
power supply. Choose one of the following values:
auto—Automatically detect and power inline devices.
•
never —Never apply inline power.
•
This window allows you to associate QoS policies and application and protocol
monitoring with the chosen interface.
To associate a QoS policy with the interface in the inbound direction, choose a
QoS policy from the Inbound drop-down menu.
To associate a QoS policy with the interface in the outbound direction, choose a
QoS policy from the Outbound drop-down menu.
QoS statistics for the interface can be monitored by going to Monitor > Traffic
Status > QoS.
To associate Netflow statistics monitoring with the interface in the inbound
direction, check the Inbound check box.
To associate Netflow statistics monitoring with the interface in the outbound
direction, check the Outbound check box.
Netflow statistics for the interface can be monitored by going to Monitor >
Interface Status. Netflow top talkers and top protocols can be monitored by
going to Monitor > Traffic Status > Top N Traffic Flows.
Cisco Router and Security Device Manager 2.5 User's Guide
Application Service
6-13