Cisco ROUTER-SDM-CD User Manual page 198

Advanced Firewall Configuration Wizard
Step 3
Configuring SSH and HTTPS
Step 1
Step 2
Note
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Cisco Router and Security Device Manager 2.5 User's Guide
8-14
If no outside interface has a static IP address, select one and click Edit to display
a dialog that allows you to reconfigure the IP address information for the
interface.
If there is anoutside interface with a static IP address, note that interface name and
complete the next procedure.
Complete the following steps to configure a management policy for SSH and
HTTPS on the router.
Click Configure > Additional Tasks > Router Access > Management Access.
If there is no management policy, click Add. If you want to edit an existing
management policy, select the policy and click Edit.
If you are editing a management policy it must be associated with an interface that
has a static IP address.
In the displayed dialog, enter the address information in the Source Host/Network
box. The IP address information that you enter must include the IP address of the
PC you will use to manage the router.
Choose an outside interface with a static IP address in the Management Interface
box. This interface must have a route to the IP address you specified in the Source
Host/Network box.
In the Management Protocols box, check Allow SDM.
Check HTTPS and SSH to allow those protocols.
Click OK to close the dialog.
Click Apply Changes in the window that displays management access policies.
Chapter 8 Create Firewall
OL-4015-12