Add Or Edit Port Map Entry - Cisco ROUTER-SDM-CD User Manual

Chapter 33 Port-to-Application Mapping
Description Column

Add or Edit Port Map Entry

Protocol Field
Description Field
Port Type List
Port Number Field
OL-4015-12
If a description of the PAM entry has been created, the description is displayed in
this column.
You can add and edit port map entries for custom or standard protocols.
If you are adding an entry, specify the protocol by clicking the list (...) button to
the right and choosing a system-defined protocol, or by entering the name of a
custom protocol. You cannot enter custom-defined protocol names for which a
port mapping already exists.
If you are editing an entry, the protocol field is disabled. If you need to change the
protocol, delete the PAM entry and re-create it using the protocol information that
you need.
This field appears if the router is running a Cisco IOS image that allows you to
specify whether this port map entry applies to TCP or to UDP traffic. You can
optionally enter a description of the port map entry. Descriptions are helpful when
you are adding entries for custom protocols or special applications. For example,
if you created an entry for a custom database application named "orville" running
on host sf-5, you might enter "orville-sf-5."
This list appears if the router is running a Cisco IOS image that allows you to
specify whether this port map entry applies to TCP or to UDP traffic. Choose
either TCP or UDP. The default is TCP.
Enter the port number that you want to map to the protocol that you specified. If
the router is running a Cisco IOS image that allows you to specify whether this
port map entry applies to TCP or to UDP traffic, you can enter multiple port
Cisco Router and Security Device Manager 2.5 User's Guide
Port-to-Application Mappings
33-3