Cisco ROUTER-SDM-CD User Manual page 369

Chapter 14 Enhanced Easy VPN
Table 14-1 RADIUS Servers Fields
Element
RADIUS Server List
Server IP
Parameters
Select
Add
Edit
Ping
OL-4015-12
Description
Cisco IOS software allows a single RADIUS source
Note
interface to be configured on the router. If the router already
has a configured RADIUS source and you choose a
different source, the source IP address placed in the packets
sent to the RADIUS server changes to the IP address of the
new source, and may not match the NAD IP address
configured on the Cisco ACS.
The Server IP column lists the IP addresses of each configured
server, for example, 192.168.108.14
The Parameters column lists the authorization and accounting ports
for each server. For example, the column might contain the
following entry for a RADIUS server:
Authorization Port 1645; Accounting Port 1646
The Select column contains a checkbox for each configured server.
Check the box next to each server that you want to be used. The
router does not contact a RADIUS server if the box next to it is not
checked.
Click Add to create an entry for a RADIUS server.
Select a server entry and click Edit to change the information the
router has for that server.
Select a server entry and click Ping to test the connection between
the router and the RADIUS server.
Cisco Router and Security Device Manager 2.5 User's Guide
14-3