L.12.2 Device Registration; L.12.3 Policy Management; L.12.4 Package And Content Management - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Location
Section 6.4,
"Uninstalling the
ZENworks Agent," on
page 66

L.12.2 Device Registration

The following changes were made in this section:
Location
Section 11.3,
"Automatically Registering
the Services at the Initial
Startup of zmd," on
page 100

L.12.3 Policy Management

The following changes were made in this section:
Location Change
Section 16.6, "Remote Added the following note in
Execute Policy," on
page 159
NOTE: If you select Day of the Week Specific as the schedule type and Start
Immediately at Start Time, and then Repeat until End Time Every, and if the
Start Time and End Time spans midnight, the Remote Execute policy is
executed only at the Start Time, and fails to repeat execution.

L.12.4 Package and Content Management

The following changes were made in this section:
Location Change
Chapter 18, "Package Added a sample script that can be used to upload bulk packages into the
and Content ZENworks server.
Management
Overview," on
page 203
Change
Added the following note:
NOTE: When you uninstall ZENworks Linux Management on SLES 10 and
SLED 10 managed devices, the core zmd packages such as zmd, rug, zen-
updater, and zen-inventory are not removed because they are also installed
as a part of the distribution. Hence, when you reinstall the ZENworks Agent on
these devices, the configuration files such as zmd.conf that are associated
to these packages persist.
Change
Added the following information:
If you want to use special characters such as $, !, &, ;, ', and " in the key
value, you must enclose the value within single quotes.
Step 10:
Documentation Updates 673