Deleting Catalogs - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Depending on the type of object you select, you can rename, copy, or move the selected object. For
example, if you select a catalog object, you can rename and move the catalog, but you cannot copy
it. If you select a bundle object, you can rename, copy, or move the object. If the option is dimmed,
that option is not available for the selected object type.
Some actions cannot be performed on multiple objects. For example, if more than one check box is
selected, the Rename option is not available from the Edit menu.
1 From the ZENworks Control Center, click the Bundles tab.
2 In the Bundles list, select the box next to the catalog's name, click Edit, then click an option.
Rename: Click Rename, type a new name for the catalog, then click OK.
Move: Click Move, choose a destination folder for the selected objects, then click OK.
If you rename or move a catalog, its assignments are still in place and ZENworks Linux
Management does not redistribute the catalog to devices because of the name or location
change.

22.6 Deleting Catalogs

If you delete a catalog from your ZENworks Linux Management system, the catalog does not
display on the Bundles or Devices pages in the ZENworks Control Center; however, the software in
the catalog that is installed remains on the previously assigned devices.
If you remove a catalog's assignments, the previously assigned devices are no longer assigned to the
catalog; however, the software in the catalog remains on those devices.
To remove the software contained in catalogs from devices, see
Execute Policy to Remove Bundles and Packages from Devices," on page
You can use the ZENworks Control Center or the zlman command line utility to delete catalogs. The
following procedure explains how to perform this task using the ZENworks Control Center. If you
prefer the zlman command line utility, see the Catalog Commands section of
To delete a catalog from the ZENworks Control Center:
1 In the ZENworks Control Center, click the Bundles tab.
Section 20.14, "Using a Remote
252.
zlman (1) (page 547).
Using Catalogs 275