Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 103

3 Fill in the fields:
Name (used as the registration key code): Provide a name for the registration key. When
devices register during installation or later using the rug sa command, this is the name the
device provides to be assigned this registration. Any device that presents this name is given the
assignments associated with this registration.
Choose something simple for reduced security, or click Generate to create a complex
registration string that is difficult to guess. Use the Generate option along with a registration
key limit for increased security.
The following characters cannot be used when creating a registration: # * ( + \ ; ' " < > / ,
Folder: Specify the folder for this registration key. This is for organizational purposes only.
Devices do not need to know where a registration key is located in order to use it, they simply
need to know the key name.
Description: Provide a description for the key. This description displays in the ZENworks
Control Center, which is the administrative tool for ZENworks Linux Management.
Number of times this key can be used: Choose whether to allow the key to be used an
unlimited number of times or specify a number of times that the key can be used.
For security purposes, this option lets you limit the number of devices that can register using
this key.
4 Click Next to display the Naming and Containment Rules page.
Managing Registration Keys and Rules 103