Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 69

Perform the following tasks in the order listed:
"Creating a System Variable for the SLES 9 Managed Device" on page 69
"Creating a System Variable for the SLES 10 Managed Device" on page 69
"Creating the Remote Execute Policy and Assigning It to the Managed Devices" on page 69
Creating a System Variable for the SLES 9 Managed Device
1 In ZENworks Control Center, click the Devices tab.
2 Click Servers.
3 From the list of servers, click the SLES 9 managed device, then click the Settings tab.
4 Click System Variables, then click Override settings.
5 In the System Variables panel, click Add, then fill in the following details:
Name: source_path
Value: /etc/opt/novell/zenworks/zmd
6 Click OK.
7 Click Apply, then click OK.
Creating a System Variable for the SLES 10 Managed Device
1 In ZENworks Control Center, click the Devices tab.
2 Click Servers.
3 In the list of servers, click the SLES 9 managed device, then click the Settings tab.
4 Click System Variables, then click Override settings.
5 In the System Variables panel, click Add, then fill in the following details:
Name: source_path
Value: /etc/zmd
6 Click OK.
7 Click Apply, then click OK.
Creating the Remote Execute Policy and Assigning It to the Managed Devices
1 In ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Remote Execute Policy, then click Next to display the Policy Name
page.
4 Fill in the Policy Name, Folder, and Description fields. For more information, see
page 160 in Section 16.6, "Remote Execute Policy," on page
5 Click Next.
6 In the Remote Execute Policy page, configure the following settings:
Executable Type: Select Binary.
Maximum waiting time: Select Wait till the program completes the execution.
Step 4 on
159.
Configuring Management Zone Settings 69