Modifying Report Details; Deleting A Report Or Folder - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Task
Move

42.3.2 Deleting a Report or Folder

To delete a report or folder
1 In the ZENworks Control Center, click the Reports tab.
2 Select the report or folder check box, then click Reports > Delete.
This permanently removes the report from the database.

42.4 Modifying Report Details

1 In the ZENworks Control Center, click the Reports tab.
2 Select a report.
3 To modify the settings of an existing report, complete any of the following fields or options:
Field
General
Columns
Filters
Generate
Apply
Reset
4 To generate the report, click Generate.
528 Novell ZENworks 7.2 Linux Management Administration Guide
Description
Displays the Move Report dialog box. Select the folder to which the
report should be moved.
Description
Revise the report description.
Add, delete, or change the column layout and sorting details of the
report. See Section 42.2, "Creating a Report," on page 524
information about adding columns to a report.
Novell recommends that you use the Message From This Type
Object column only in conjunction with other message and device
columns and filters. If you add other types of columns or filters, the
message displayed in this column might be inaccurate. Known
exceptions of device columns and filters that also cause this
inaccuracy are
Device Code Page
Device Virtual Memory
Device Visible Memory
Revise, add, or delete the report filters. See
Report," on page 524 for more information about naming, formatting,
and filtering.
Runs the report based on the settings displayed on the page. See
Section 42.5, "Generating Reports," on page 529
information.
Saves the new settings.
Resets the report to its original settings.
for more
Section 42.2, "Creating a
for more