Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 432

6 Click Next to display the Set AutoInstall Attributes page:
7 Fill in the fields:
Linux kernel file: The path should be relative to the home directory of the novell-tftp daemon.
For example, you might do the following:
a. Copy the kernel file, whose default location is /boot/loader/linux on a SLES 9 SP1
bootable CD.
b. Place the copy in a location on your imaging server. For example, /srv/tftp/
autoyast/linux.
c. In this field, enter the path that is relative to the daemon. For example, autoyast/linux.
Initial RAM drive: The path should be relative to the home directory of the novell-tftp
daemon. For example, you might do the following:
432 Novell ZENworks 7.2 Linux Management Administration Guide