Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 195

This setting lets you specify the logical relationship between filter sets and filters. Select And
to satisfy all the sets of filters and select Or to satisfy any one of the filter sets. By default, the
filters are defined in one filter set. Within a filter set, select OR to satisfy any one of the filter
conditions and select AND to satisfy all the filter conditions.
5 (Optional) Click Add filter. The new filter is added and it is applied based on the logical
relationship you have defined in
6 (Optional) Click Add filter set to add a new filter set. This filter is also applied based on the
logical relationship you have defined in
7 Select a value from the first drop-down list.
The operator list and other text boxes are displayed based on the value you have selected in the
first drop-down list.
8 Specify a value in the text box. The following table describes values you can select in the first
drop-down list and corresponding examples you can specify:
Criteria
Date of File
Distribution
Environment
Find File
Find RPM
Free Disk Space
Kernel
Processor
Size of file
Total Disk Space
Used Disk Space
Step 4 on page
Step 4 on page
Field 1 Field 2
Filename with Logical condition
complete path
Logical condition Distribution name with
version number
Environment Variable Logical condition
Filename with full Logical condition
path
RPM name
Logical condition
Make sure that the
RPM name you
specify is case-
sensitive.
File system. For Logical condition
example, /dev/hda1.
Logical condition Linux kerne_version.
For example, Linux
2.6.5-7.111
Logical condition
Filename with Logical condition
complete path
File system. For Logical condition
example, /dev/hda1.
File System. For Logical condition
example, /dev/hda1
194.
194.
Field 3
Date
-
Value
-
-
Value in KB
-
-
Size in bytes
Value in KB
Value in KB
Managing Policies 195