Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 352

2 If you want to modify a settings.txt file that is to be included on this diskette, follow
Step 2
Step 3
3 (Required) In the Imaging Proxy Server Address section on the CD Media Boot tab, specify
either the fixed IP address or the full DNS name of Preboot server (where novell-pbserv is
running).
This specifies which Preboot server to connect to when you boot a device with the bootable
diskette.
Use a DNS name only if it is working on your network and the imaging server has an entry in
your DNS server's name resolution table.
4 Format one high-density diskette, or insert a preformatted blank diskette in the diskette drive of
the Windows device.
5 Click Create CD Boot Disk.
This creates a bootable diskette that enables a device that cannot otherwise boot from a CD or
DVD to boot from the imaging CD or DVD. Any settings.txt configurations made here
are included in the copy written to the bootable diskette.
6 After the diskette is created, click Close.
7 Insert both this diskette and the imaging CD or DVD on the device to be imaged, then boot the
device.
The diskette enables the imaging CD or DVD to be booted by the device.
352 Novell ZENworks 7.2 Linux Management Administration Guide
through Step 4 in "Managing the Settings.txt File" on page
in this section.
348, then continue with