Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 613

Parameter Description
PolicyLogLevel = 1 The value assigned here determines which events are entered in novell-
zenprebootpolicy.log. Specifying a high level in an active system can
quickly fill the log. Valid values are: 0, 1, 2, 3, and 4. The default is 2.
Each message from the novell-zmgprebootpolicy server is assigned a priority
level. If PolicyLogLevel is set to a value equal to or greater than a message's
priority level, that message is entered in novell-zenprebootpolicy.log.
All other messages are ignored.
Priority meaning:
0: Critical information. Service start, stop, and critical events are logged.
1: Warning information. Only failed client transactions are logged.
2: Transaction information. All completed client transactions are logged.
3: Request information. All client requests are logged.
4: Debugging information. All server events, including each packet received,
are logged.
By default, this parameter is commented out.
PolicyLogFile = /var/ The file where all log file entries are placed.
opt/novell/log/
By default, this parameter is commented out.
zenworks/preboot/
novell-
zenprebootpolicy.log
PolicyLogFileSize = 15 The size of the log file is controlled by the value of PolicyLogFileSize, where 15
is the default (in MB).
When the log file exceeds the PolicyLogFileSize value, it is deleted and
restarted.
PrebootServer = This field contains the address of the imaging server that should be used to
10.0.0.5 resolve policies.
By default, this parameter is commented out.
EnableAMTSupport = This feature is not currently supported in Novell ZENworks Linux Management.
Yes
This field enables or disables support for Intel's AMT technology.
By default, this support is disabled by commenting out the parameter.
Parameters that are not commented out, but contain no values, are given a default value.
Understanding Script Arguments
The following arguments are available for each of the Preboot Services daemons described above:
Imaging Utilities and Components 613