Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 247

4 Specify a removal option:
No: Although the device is removed from the Assignments section and the bundle is no
longer assigned to the device, the software remains installed on the previously assigned
device.
Yes: The software is uninstalled from previously assigned devices according to the
schedule you specify in the next step of this wizard.
5 (Conditional) If you chose Yes in
6 Select a schedule type from the drop-down list.
The settings you configure on this page determine when the assignments are removed from
previously assigned devices.
The following schedules are available. Click the link in the left column for more information
about each schedule type.
Schedule Type
Date Specific
Relative to Refresh
7 Click Next to display the Finish page, make any changes by using the Back button as necessary,
then click Finish to complete the assignment removal.
Step 4, click Next to display the Schedule page.
Description
Select one or more dates on which to remove assignments and set
other restrictions that might apply.
Schedule when the assignments are removed, either immediately
after the device refreshes or a specified amount of time after the
device refreshes. You can also specify whether the assignment
removal is repeated and specify a time period when you do not want
the assignments removed to help minimize network traffic during
that time.
Using RPM and File Bundles 247