Zenworks Imaging Floppy Boot Disk Creator (Zmediacreator.exe) - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Command
zisedit
field=new_information
zisedit -c
zisedit -r
zisedit -h
D.4 ZENworks Imaging Floppy Boot Disk Creator
(zmediacreator.exe)
You can use this utility to do the following:
Create a floppy boot diskette to help devices that cannot boot from their CD or DVD to do so
Manage the settings.txt file
Create a Preboot Bootable Image (PBI)
The ZENworks Imaging Media Creator utility must be run on a Windows device. You need Samba
running on the Linux imaging server in order for the Windows device to have access to the utility.
Explanation
You can change the information for one field using this syntax, where field
is any valid field name and new_information is the information you want
this field to contain. field is not case sensitive.
For example, enter zisedit Mask=255.255.252.0 to enter this
information in the subnet mask field.
All of the following are valid field names (the corresponding minimum
names that can also be entered on the command line are shown in
parenthesis after each field name):
JustImaged (J)
ScriptedImage (SC)
LastBaseImage (L)
Zone GUID (T)
Device GUID (ObjectDN)
Device Index (N)
Windows WorkGroup (WorkG)
Windows SID (SI)
WorkstationID (Works)
DHCP (DH)
IP (I)
Gateway (Gateway)
Mask (M)
DNSServerCount (DNSServerC)
DNSServer1 (DNSServer1)
DNSSuffix (DNSSu)
DNSHostName (DNSH)
PXEWorkRevision (PXEWorkR)
PXEWorkObject (PXEWorkO)
PXETaskID (PXETaskI)
PXETaskState (PXETaskS)
PXETaskRetCode (PXETaskR)
Clears all image-safe data fields.
Removes the image-safe data store.
Displays help for zisedit.
Imaging Utilities and Components 601