Preboot Services Functionality; Preparing To Use Pxe; Preboot Bundles - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Table of Contents

Advertisement

28.2.3 Preparing to Use PXE

Before you can use Preboot Services with PXE, you need to do the following:
1. Install ZENworks 7.2 Linux Management on your imaging server. For more information, see
the
Novell ZENworks 7.2 Linux Management Installation
2. Enable PXE on your ZENworks Linux Management devices. For more information, see
Section 29.6, "Enabling PXE on Devices," on page
3. Have a standard DHCP server, either on your imaging server or on another network server. For
more information, see

28.3 Preboot Services Functionality

Review the following sections to understand Preboot Services functionality:
Section 28.3.1, "Preboot Bundles," on page 323
Section 28.3.2, "Preboot Services Menu," on page 325
Section 28.3.3, "Image Storage Security," on page 326
Section 28.3.4, "Non-registered Device Settings," on page 326
Section 28.3.5, "Preboot Work Assignment Rules," on page 327
Section 28.3.6, "Preboot Referral Lists," on page 328
Section 28.3.7, "Intel Active Management Technology (AMT)," on page 329

28.3.1 Preboot Bundles

In ZENworks Linux Management, Preboot Services uses bundles to apply Preboot Services work to
devices. For example, Preboot bundles can contain tasks, such as restoring an image, that are
performed at the time a device boots.
In order for a device to utilize a Preboot bundle, the bundle must be assigned to the device, its group,
or its folder.
The available Preboot bundles are:
"AutoYaST Bundle" on page 323
"Dell Configuration Bundle" on page 324
"Kickstart Bundle" on page 324
"ZENworks Image Bundle" on page 324
"ZENworks Multicast Bundle" on page 324
"ZENworks Script Bundle" on page 325
AutoYaST Bundle
Provides the location and access protocol for installing using AutoYaST, including the network
installation directory for SUSE
of SUSE Linux using Preboot Services.
"Configuring LAN Environments for Preboot Services" on page
®
Linux. This bundle allows you to launch an automated installation
Understanding Preboot Services in ZENworks Linux Management 323
Guide.
392.
362.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks linux management 7.2ir2

Table of Contents