Novell Linux Desktop Policy - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

15 Select the schedule to apply to the assignments from the drop-down list, then select the desired
options, which vary, depending on the schedule type you select.
The settings you configure on this page determine when the policy is applied to devices.
See Section 15.3, "Schedules," on page 122
their options.
16 Click Next to display the Policy Groups page.
17 (Optional) Click Add to open the Select Groups dialog box, then click the underlined links in
the Name column to select the desired policy groups and display their names in the Selected list
box.
Using policy groups eases administration efforts by letting you group several policies so you
can use common assignments, schedules, and so forth, rather than configuring these settings for
each policy you create. For more information, see
page 179.
18 Click Next to display the Finish page.
19 Review the information on the Finish page, making any changes to the policy settings by using
the Back button as necessary. Click Finish to create the policy as configured according to the
settings on the Finish page.

16.5 Novell Linux Desktop Policy

The Novell Linux Desktop policy is used to configure the GNOME Novell Linux Desktop settings
on a device.
To configure the Novell Linux Desktop policy:
1 In the ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Novell Linux Desktop Policy, then click Next to display the Policy
Name page.
for information about the available schedules and
Section 17.3, "Creating Policy Groups," on
Creating Policies 151