Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 293

Configuration Element
Password
Proxy
LocalServer
<LocalServer>
<Base></Base>
<Type>zlm</Type>
<User>Administrator</User>
<Password>password</Password>
</LocalServer>
Configuration Element
Base
Type
Description
Password to use when connecting to the remote server. If no password is
specified, zlmmirror reads the password from the following location
depending on Type:
ZLM: /etc/opt/novell/zenworks/zmd/secret for SLES 9 and OES,
and /etc/zmd/secret for SLES 10 and SLED10
RCE: /etc/ximian/partnernet
YAST: /etc/sysconfig/onlineupdate
When connecting to an RHN server or Dell server, leave this element empty.
NU: /etc/opt/novell/zenworks/zmd/secret for SLES 9 and OES,
and /etc/zmd/secret for SLES 10 and SLED10
For the Novell Updates (NU) server, the device must be registered with NCC
to use the device secret as Password.
The Proxy configuration element is optional and is used with an Internet
Proxy. You can add the Proxy element anywhere in the RemoteServer
section.
If the Internet proxy requires authentication, the format looks like the
following example:
<Proxy>http://username:password@server:port</Proxy>
If the Internet proxy does not require authentication, the format looks like the
following example:
<Proxy>https://server:port</Proxy>
Description
If the Type element indicates STATIC mirroring, use the Base element to
define the destination path where files will be stored (/path/on/
filesystem, for example).
If the Type element indicates ZLM mirroring, leave the Base element empty.
Type of mirroring you want performed:
ZLM: Mirrors catalogs and bundles directly to your ZENworks Linux
Management server. After mirroring, mirrored catalogs and bundles are
displayed in the ZENworks Control Center.
STATIC: Mirrors packages to the file system of your ZENworks Linux
Management server, but does not add them to ZENworks.
Mirroring Software 293