Imaging Utilities And Components; Starting Image Explorer; Determining The Image Explorer Version - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Imaging Utilities and Components

3 1
The following sections provide reference information on Novell
imaging utilities, commands, and configuration settings.
Section 31.1, "Starting Image Explorer," on page 457
Section 31.2, "Determining the Image Explorer Version," on page 457
Section 31.3, "Image Explorer versus Linux Konquerer," on page 458
Section 31.4, "Opening an Image," on page 458
Section 31.5, "Saving Image Changes and Exiting the Utility," on page 458
Section 31.6, "Managing Image Properties," on page 458
Section 31.7, "Image File Operations," on page 460
Section 31.8, "Modifying Image Content," on page 465
Section 31.9, "Creating a New Image File," on page 466

31.1 Starting Image Explorer

There are no command line parameters for the Image Explorer utility.
1 To start Image Explorer, run the following file:
/opt/novell/zenworks/preboot/bin/zmgexp

31.2 Determining the Image Explorer Version

To determine which version of Image Explorer you are using:
1 Click Help > About.
® ®
ZENworks Linux Management
Imaging Utilities and Components
31
457