Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 138

Even if you do not include this system requirement in the policy, the system checks whether the
Evolution client is installed on a managed device or not. If the system finds the Evolution client
on a device, it also checks the version. If it finds an earlier version than the specified one, the
policy is enforced but a warning message is generated. If the Evolution client is not installed on
a managed device, the policy is not enforced and an error message is generated.
11 Click Next to display the Summary page.
12 Click Finish to create the policy as configured according to the settings on the Summary page.
If you click Finish, the Evolution policy is created but it does not have devices assigned or a
schedule specified. At some point in the future, you need to configure additional options for the
policy by continuing with
or
Click Next to display the Policy Assignment page to perform the following tasks:
Specify assignments for this policy
Specify the schedule for this policy
Specify groups for this policy
13 Assign the policy to the devices.
13a Click Add to browse for and select the appropriate Server or Workstation objects.
You can also select Folder or Group objects.
13b Click the down-arrow next to Servers or Workstations to expand the list, then click the
underlined link in the Name column to select the desired objects and display their names
in the Selected list box.
Assigning a policy to a Group object is the preferred method of assigning the policy.
Assigning the policy to a large number of objects (for example, more than 250) might
cause increased server utilization.
13c Click OK.
14 Click Next to display the Policy Schedule page.
138 Novell ZENworks 7.2 Linux Management Administration Guide
Section 17.4, "Assigning Policies," on page 182.