Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 186

Advanced: Click Advanced to display the Edit Assignments page to display a list of the
devices that are assigned to the selected policy, the folder that contains each device, and
each device's schedule. You can use the Edit Assignments page to edit certain settings,
such as the schedule.
Add: Click Add to launch the Assign Policy Wizard to select the devices to be assigned to
the selected policy. For more information, see
page
Remove: Select the device by selecting the check box next to the appropriate device
name, then click Remove to remove the device's assignment from this policy.
2c Review the information in the Event Log section, then make the desired changes.
The Event Log section lists all unacknowledged errors and warnings.
The Status column displays an icon indicating each item's status. Position the mouse
pointer over each icon to display a short message describing the status of the item.
To acknowledge an error or warning, click its name in the Event column, then click
Acknowledged in the Message Detail Information dialog box that displays. You can also
click Advanced, select the check box next to the appropriate event, then click
Acknowledge (a check mark displays on the right side of the Date column to indicate that
the item has been acknowledged).
2d Review the information in the Upcoming Events section.
The Upcoming Events section lists events scheduled for the selected policy. You can click
the calendar icon to display a calendar to view events for the desired date. You can also
use the arrows to view events for the previous or next day, week, or month.
2e Review the information in the Groups section, then make the desired configuration
changes.
The Groups section lists the groups that contain the selected policy.
You can also use the following options:
Advanced: Click Advanced to display the Edit Groups page to display a list of the groups
that contain the selected policy. You can click Add to open the Select Groups dialog box to
add the selected policy to existing groups. You can also remove a group by selecting the
check box next to the Name column, then clicking Remove to remove.
Add: Click Add to open the Select Groups dialog box, then click the blue arrow in the
Select column to select the desired group and display its name in the Selected list box.
Remove: Select the check box next to the appropriate group name, then click Remove to
remove the selected policy from the group.
3 Click the Details tab, then make the desired configuration changes. For more information about
the available options, see the section about the appropriate policy in
Policies," on page
3a To edit the system requirements of a policy, see
Requirements," on page
3b Click Apply to save any changes you have made.
4 After a policy is modified, the Revision field of the policy, which is available under the General
section of the Summary page, must be incremented for the updated policy to be applied to
associated devices. If the policy revision is not incremented, the changes made to the policy are
not applied on the device.
186 Novell ZENworks 7.2 Linux Management Administration Guide
182.
127.
194.
Section 17.4, "Assigning Policies," on
Chapter 16, "Creating
Section 17.8, "Editing System