40.2.2 Configuring System Log Settings
These settings allow you to insert messages into the system file. The path of the system log file is /
var/log/messages.
1 In the ZENworks Control Center, click Configuration.
2 In Management Zone Settings, click Local Device Logging.
3 Under System Log, select the Send Message to Local System Log if Severity Is check box to
enable the fields.
4 In the Send Message to Local System Log if Severity Is field, select a value from the drop-down
list.
Select Error to store the messages with an Error severity.
Select Warning and Above to store the messages with a severity of Warning and Error.
Select Information and Above to store the messages with a severity of Information,
Warning, and Error.
5 Click OK or Apply.
Configuring Message Logger Settings 517