Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 609

Parameter Description
ProxyLogFileSize = 15 The size of the ProxyLogFile file is controlled by the value of ProxyLogFileSize,
where 15 is the default (in MB).
When the log file exceeds the ProxyLogFileSize value, it is deleted and
restarted.
Parameters that are not commented out, but contain no values, are given a default value.
The novell-proxydhcp daemon is compliant with the following RFCs:
RFC 2131 - Dynamic Host Configuration Protocol
RFC 2132 - DHCP Options and BOOTP Vendor Extensions
The novell-proxydhcp daemon is compliant with the Preboot eXecution Environment (PXE)
Specification v2.1 industry specification, published by Intel.
novell-tftp
The novell-tftp daemon provides TFTP services to imaging clients.
This daemon is started automatically when installing ZENworks Linux Management, or when
rebooting the server.
"Understanding the novell-tftp Components" on page 609
"Configuring novell-tftp" on page 609
Understanding the novell-tftp Components
To initiate the novell-tftp daemon, enter the following command (listed under Script Location) on
the Linux command line in a terminal program:
/etc/init.d/novell-tftp
Table D-9 lists the arguments for this command, the executable it starts, and the configuration file it
uses:
Novell-tftp Command Details
Table D-9
Script Arguments: start, stop, restart, force-reload, status, showpid (for descriptions of these
arguments, see
Executable:
/opt/novell/bin/novell-tftpd
Configuration File:
/etc/opt/novell/novell-tftp.conf
Configuring novell-tftp
The novell-tftp configuration file (novell-tftp.conf), contains the following parameters for
the Novell TFTP server:
"Understanding Script Arguments" on page 613)
Imaging Utilities and Components 609