6 Select the desired options:
Executable type: Select an executable type to run on a managed device (script, binary, or
Java). Depending on the executable type you select, different options are available, as
described below.
Maximum waiting time: Indicate the waiting time after starting the script, binary, or Java
program. The following table explains the available options:
Option
Do not wait
Wait till the program completes
the execution
Wait for <n> sec
NOTE: The launched program is not terminated by the enforcer if you select the Do not wait
or Wait for <n> sec options.
(Conditional) If you chose Script in the Executable Type field in
following options are available:
Description
The Remote Execute enforcer does not wait for the program to
be completed.
The Remote Execute enforcer waits for the program to be
completed.
Indicates how many seconds the Remote Execute enforcer
should wait after starting the program.
Step 6 on page
161, the
Creating Policies 161