Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 535

-r, --no-remote
Do not load any optional modules.
--no-services
Don't load the saved services.
Help Options
--help, -?
Display the help information and exit.
Files
zmd.conf
Configuration file. Options such as proxy and cache settings can be adjusted through this file
directly or with the rug set command. The file is located in /etc/opt/novell/
zenworks/zmd/ on SLES 9, OES 1, NLD, RHEL 3/4/5; and in /etc/zmd/ on SLES 10,
SLED 10, and OES 2.
novell-zmd
Initialization script. You should use this script to start and stop zmd, rather than running it
directly. The file is located in /etc/init.d/ on SLES 9, SLES 10, SLED 10, NLD, RHEL,
and OES.
zmd-messages.log
Log file. The file is located in /var/opt/novell/log/zenworks/ on SLES 9, OES 1,
NLD, and RHEL 3/4/5; and in /var/log/ on SLES 10, SLED 10, and OES 2.
zmd
Cached information from servers. The directory is located in /var/opt/novell/
zenworks/cache/ on SLES 9, OES 1, NLD, and RHEL 3/4/5; and in /var/cache/ on
SLES 10, SLED 10, and OES 2.
initial-configuration
URL for the supported services that zmd registers at initial startup. You can provide all the
options that you would have otherwise used from rug for registration. The file is located in /
etc/opt/novell/zenworks/zmd/ on SLES 9, OES 1, NLD, and RHEL 3/4/5; and in /
etc/zmd/ on SLES 10, SLED 10, and OES 2.
Examples
This program normally runs as root.
/etc/init.d/novell-zmd start
Runs the program in the standard way.
/opt/novell/zenworks/sbin/zmd or /usr/sbin/zmd
Runs the program directly.
Command Line Utilities 535