Text File Policy - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

20 Click Next to display the Finish page.
21 Review the information on the Finish page, making any changes to the policy settings by using
the Back button as necessary. Click Finish to create the policy as configured according to the
settings on the Finish page.

16.8 Text File Policy

The Text File policy is used to make changes to any text file on a device.
To configure the Text File policy:
1 In the ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Text File Policy, then click Next to display the Policy Name page.
4 Fill in the fields:
Policy name: (Required) Provide a unique name for the policy. The name you provide
displays in the ZENworks Control Center interface, which is the administrative tool for
ZENworks Linux Management.
For more information, see
Center," on page
Folder: (Required) Type the name or browse to the folder that this policy will be created
in. Folders display in the ZENworks Control Center.
Description: Provide a short description of the policy. This description displays on the
policy's Summary page in the ZENworks Control Center interface.
Appendix C, "Naming Conventions in the ZENworks Control
589.
Creating Policies 171