Evolution Policy - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

17 (Optional) Click Add to open the Select Groups dialog box, then click the underlined links in
the Name column to select the desired policy groups and display their names in the Selected list
box.
Using policy groups eases administration efforts by letting you group several policies so you
can use common assignments, schedules, and so forth, rather than configuring these settings for
each policy you create. For more information, see
page 179.
18 Click Next to display the Finish page.
19 Review the information on the Finish page, making any changes to the policy settings by using
the Back button as necessary. Click Finish to create the policy as configured according to the
settings on the Finish page.

16.2 Evolution Policy

The Evolution policy is used to configure the Evolution
To configure the Evolution policy:
1 In the ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Evolution Policy, then click Next to display the Policy Name page.
Section 17.3, "Creating Policy Groups," on
e-mail client.
TM
Creating Policies 133