Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 370

OptionColor = BRIGHT_WHITE
OptionBackgroundColor = BLUE
#The chosen colors determine the color of the high-lighted option
ChosenColor = BRIGHT_WHITE
ChosenBackgroundColor = RED
#Maximum of 9 menu items
MenuOptionCount = 7
option1 = Start ZENworks Imaging
option2 = Start ZENworks Imaging Maintenance
option3 = Disable ZENworks Partition
option4 = Enable ZENworks Partition
option5 = Start DELL DTK
option6 = Start DELL DTK (Maintenance Mode)
option7 = Exit
CFG1 = z_auto.cfg
CFG2 = z_maint.cfg
CFG3 = z_zpdis.cfg
CFG4 = z_zpen.cfg
CFG5 = dell-dtk.cfg
CFG6 = dell-dtk_maint.cfg
CFG7 = 0
Hint1 = ZENworks Imaging in Automated Mode
Hint2 = ZENworks Imaging Linux Session in Interactive Mode
Hint3 = Disable Existing ZENworks Partition
Hint4 = Re-enable a Disabled ZENworks Partition
Hint5 = DELL Deployment Toolkit v2.1 in Automated Mode
Hint6 = DELL Deployment Toolkit v2.1 in Maintenance Mode
Hint7 = Boot to Local Hard Drive
2 To change the appearance of the menu, edit the first seven sections (title and colors).
To change colors, the mnemonics you enter must be selected from the following:
BLACK
BLUE
GREEN
CYAN
3 To change the menu options, edit the last four sections, beginning with "MenuOptionCount."
The menu options, their code, and their hint descriptions are correlated by the number (see "#"
where used below).
MenuOptionCount: This number must match the total number of options defined in the next
three sections. The limit is 9 menu options.
option#: Displayed in the menu as the option's text.
CFG#: The configuration file that is used upon selecting the menu option.
Hint#: Displayed in the bottom of the screen to explain the highlighted menu option's
function. It changes as you highlight a menu option.
370 Novell ZENworks 7.2 Linux Management Administration Guide
RED GRAY
MAGENTA YELLOW
BROWN BRIGHT_WHITE
WHITE LT_BLUE
LT_GREEN
LT_CYAN
LT_RED
LT_MAGENTA