"Adding Content" on page 467
"Configuring File Sets" on page 467
Adding Partitions
1 Select the top line of the new image file.
This is the line that will display the path to the new .zmg file when you save it.
2 Click Image > Create Partition.
3 Repeat
Step 1
through
4 To add content to the partitions, continue with
Adding Content
1 See
Section 31.8, "Modifying Image Content," on page 465
content.
2 Continue with
"Configuring File Sets" on page
Configuring, and Saving the New Image File" on page
Configuring File Sets
1 See
"Configuring File Sets" on page 463
2 Return to
Step 3
in
"Creating, Configuring, and Saving the New Image File" on page
Step 2
as necessary.
"Adding Content" on page
for instructions on configuring file sets.
for instructions on adding new
467, or return to
Step 3
in
466.
Imaging Utilities and Components 467
467.
"Creating,
466.