Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 298

3 (Conditional) If you are connecting to the remote server through a proxy server, configure the
proxy server settings. If the remote server does not connect through a proxy server, skip to
Step 4.
3a Click Show Proxy Settings.
3b Specify the IP address or the host name of the proxy server.
3c Specify the port number of the proxy server.
3d To authenticate to the proxy server, select the Authentication Required check box, and
specify the username and password for the proxy server.
4 Configure the local server that you want to receive the mirrored software. You can mirror the
software either directly to your ZENworks Linux Management server, or to the file system of
your ZENworks Linux Management server. However, mirroring the software to the file system
does not add it to ZENworks.
4a Select the local server that you want to receive the mirrored software.
4b Specify the username and password to connect to the local server.
4c To validate the credentials for the servers, and to connect to the remote server, click
Connect.
5 To view the log information of the server configurations, go to /var/opt/novell/log/
zenworks/zlmmirror.log file.
6 Continue with
Configuring the Catalogs
The xzlmmirror-Catalog Settings window is automatically displayed after the credentials are
validated for the servers that you have specified in the xzlmmirror-Server Settings window. You
must provide details about the catalogs and bundles you want mirrored to your server in the
xzlmmirror-Catalog Settings window.
Review the following sections:
"Adding Catalogs" on page 298
"Editing Catalog Settings" on page 301
Adding Catalogs
The Add Catalogs page lets you configure each catalog you want to mirror.
298 Novell ZENworks 7.2 Linux Management Administration Guide
"Configuring the Catalogs" on page 298.