Deleting Bundles, Bundle Groups, And Folders - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Schedule Type
Date Specific
Relative to Refresh
8 Click Next to display the Finish page, make any changes by using the Back button as necessary,
then click Finish to complete the assignment removal.
20.11 Deleting Bundles, Bundle Groups, and
Folders
Before you delete bundles, bundle groups, and folders from the ZENworks Control Center, review
the following information before performing the procedure in this section to ensure that you obtain
the desired results.
You can use the ZENworks Control Center or the zlman command line utility to perform certain
tasks in ZENworks Linux Management. The following procedures explain how to perform these
tasks using the ZENworks Control Center. If you prefer the zlman command line utility, see the
Registration Commands section of
Deleting Bundles: Depending on your needs, you can delete a bundle from your ZENworks Linux
Management system, remove a bundle's assignments from devices, or use the Uninstall Bundle
Wizard to remove the software from assigned devices.
If you delete a bundle from your ZENworks Linux Management system, the bundle does not display
on the Bundles or Devices pages in the ZENworks Control Center; however, the software contained
in that bundle remains on the previously assigned devices.
If you remove a bundle's assignments, the previously assigned devices are no longer assigned to the
bundle; however, the software in the bundle remains on those devices.
Deleting Bundle Groups: The results of deleting a bundle group is similar to that of deleting a
bundle.
If you delete a bundle group from your ZENworks Linux Management system, the bundle group
does not display on the Bundles page in the ZENworks Control Center and the bundle group's
assignments are removed. However, the individual bundles contained in the group are not removed
from the ZENworks Control Center and still display on the Bundles page. As with bundles, when
you delete a bundle group from the ZENworks Control Center, the software contained in that bundle
group remains on the previously assigned devices.
Deleting Folders: If you delete a folder that contains bundles from your ZENworks Linux
Management system, both the folder and its bundles are removed from the ZENworks Control
Center. However, the software contained in those bundles remain on the previously assigned
devices.
Description
Select one or more dates on which to remove assignments and set
other restrictions that might apply.
Schedule when the assignments are removed, either immediately
after the device refreshes or a specified amount of time after the
device refreshes. You can also specify whether the assignment
removal is repeated and specify a time period when you do not want
the assignments removed to help minimize network traffic during
that time.
zlman (1) (page 547).
Using RPM and File Bundles 249