Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 147

For more information, see
Center," on page
Folder: (Required) Type the name or browse to the folder that this policy will be created
in. Folders display in the ZENworks Control Center.
Description: Provide a short description of the policy. This description displays on the
policy's Summary page in the ZENworks Control Center interface.
5 Click Next to display the Source page.
6 Select the desired option, then click Next.
Import the settings from a device: Use this option to import the existing GConf settings from
any device that is registered with the ZENworks Linux Management Server. The system
obtains all settings, including default settings, from that device. You can enforce these settings
on a desired managed device or group of devices at a later time.
Before you import settings to your device, make sure the GConf settings are correct on the
device you are importing from.
If you choose this option, continue with
Define a setting on your own: Create a directory and corresponding key settings such as key
names, types, and values. At a later time, you can enforce these settings on a managed device or
on a group of devices.
Make sure that you specify the correct key names and types.
If you choose this option, continue with
7 (Conditional) If you chose the Import the settings from a device option in
choose the device from which you want to import the GConf settings.
Appendix C, "Naming Conventions in the ZENworks Control
589.
Step 7 on page
Step 8 on page
147.
148.
Step 6 on page 147,
Creating Policies 147