Generic Gnome Policy - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

Using policy groups eases administration efforts by letting you group several policies so you
can use common assignments, schedules, and so forth, rather than configuring these settings for
each policy you create. For more information, see
page 179.
18 Click Next to display the Finish page.
19 Review the information on the Finish page, making any changes to the policy settings by using
the Back button as necessary. Click Finish to create the policy as configured according to the
settings on the Finish page.

16.4 Generic GNOME Policy

The Generic GNOME policy is used to configure GConf- based applications on a device.
To configure the GNOME policy:
1 In the ZENworks Control Center, click the Policies tab.
2 In the Policies list, click New, then click Policy to display the Create New Policy page.
3 In the Policy Type list, click Generic GNOME Policy, then click Next to display the Policy
Name page.
4 Fill in the fields:
Policy name: (Required) Provide a unique name for the policy. The name you provide
displays in the ZENworks Control Center interface, which is the administrative tool for
ZENworks Linux Management.
146 Novell ZENworks 7.2 Linux Management Administration Guide
Section 17.3, "Creating Policy Groups," on