Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 59

"Selecting Installation Catalogs" on page 60
"Installing Software by Using the Software Installer" on page 60
Configuring Package Sources
Before you can use the Software Installer, you need to add package sources from which you can
install software.
NOTE: The Software Updater and the Software Installer use the same configurations. If you add a
service using the Software Updater configuration screen, that service will appear in the Software
Installer configuration and vice versa.
To add a package source:
1 Launch the Software Installer by navigating to /opt/novell/zenworks/bin and
running zen-installer with root privileges.
2 Click Configure.
3 Click Add Service.
ZENworks Agent 59