Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 606

The following Linux daemons run the imaging server processes:
"novell-pbserv" on page 606
"novell-proxydhcp" on page 607
"novell-tftp" on page 609
"novell-zmgprebootpolicy" on page 611
"Understanding Script Arguments" on page 613
novell-pbserv
The novell-pbserv daemon provides imaging services to devices.
This daemon is started automatically when installing ZENworks Linux Management, or when
rebooting the server.
"Understanding the novell-pbserv Components" on page 606
"Configuring novell-pbserv" on page 606
Understanding the novell-pbserv Components
To initiate the novell-pbserv daemon, enter the following command on the Linux command line in a
terminal program:
/etc/init.d/novell-pbserv
Table D-5
uses:
Novell-pbserv Command Details
Table D-5
Script Arguments:
Executable:
Configuration File:
Configuring novell-pbserv
The novell-pbserv configuration file (novell-pbserv.conf), contains the following
parameters:
Novell-pbserv Parameters
Table D-6
Parameter
EnableLogging=YES
606 Novell ZENworks 7.2 Linux Management Administration Guide
lists the arguments for this command, the executable it starts, and the configuration file it
start, stop, restart, force-reload, status, showpid (for descriptions of these
arguments, see
/opt/novell/zenworks/preboot/bin/novell-pbservd
/etc/opt/novell/zenworks/preboot/novell-pbserv.conf
Description
If YES, a log file is created for debug messages. This is the default.
If NO, no log file is created for debug messages.
The novell-pbserv.log file is created in the /var/opt/novell/log/
zenworks/preboot directory.
"Understanding Script Arguments" on page 613)