Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 385

2 In this section, click Preboot Services to display the configuration sections.
3 Locate the Server Referral List section:
4 Specify the ZENworks Linux Management servers:
List of server IP addresses and DNS names: Specify the DNS name or IP address of a server
that can host Preboot operations, then click Add to place the server into the referral list.
Move up/Move down: Arranges the order in which the servers are contacted. You can move
only one server at a time.
Remove: To remove a server from the list, select the server, then click Remove.
5 Click either Apply or OK to save the changes.
6 Depending on the ZENworks version of the server, do the following to copy the necessary files
from the ZENworks Linux Management imaging server to your \tftp directory on the
servers in your referral list:
ZENworks Version
ZENworks 6.5
Files to Copy
/svr/tftp/z_auto65.cfg
/svr/tftp/pxelinux.0
Action
Copy the files.
Setting Up Preboot Services 385